Splice Technologies, Inc.
Product #

DIELECTRIC SERIES
FUSION SPLICE PROTECTION SLEEVE
Dielectric Series
Description:
Splice Technologies' "Dielectric" series fusion splice protection sleeve is identical in size as our "Standard" series splice sleeve, with the exception of a non-metallic strength member. Stock lengths are available in 40 and 60mm with an after shrink diameter of 2.9mm and will accommodate fiber diameters up to 1.4mm. This product is constructed with an inner EVA meltable adhesive tube, fiberglass strength member and a polyolefin heat shrink outer tube. The tubes are clear to allow viewing of the fiber during and after splicing. The entire assembly is designed to ensure that all members maintain perfect alignment during shipping, handling and shrinking. We are proud to say that all of our products are made here in the USA and most sleeves are in stock ready for immediate delivery.

Part Number Key

FSS-DC40 - 40mm length

FSS-DC60 - 60mm length

Features:
  • Bellcore GR-1380 Compliant
  • RoHS & REACH Compliant
  • Outer tube meets SAE AMS-DTL-23053/5 Class 2
  • Inner EVA meltable adhesive tube
  • Full length strength member for total fiber support
  • Close dimensional tolerances
  • Open ended assembly minimizing the possibility of air entrapment during shrinkage
  • Operating Temperature Range -55°C to +110°C
  • Packaged in 50 per bag

Dielectric Series
Splice Sleeve (pdf)